Patio heater tilt switch reset or replacement is a must if it gets defective. Electrical interruption is the main culprit behind a faulty tilt switch. If it gets bad, the gas valve will remain closed, and you can’t turn on your patio heater.
And this guide on patio heater troubleshooting will help you to learn:
- How to replace tilt switch on patio heater
- How to bypass the tilt switch on the patio heater.
So, stay in tune with us till the end.
Table of Contents
Patio Heater Tilt Switch Reset or Replacement [5 Easy Steps]
Here is the step-by-step guide on replacing the tilt switch of your patio heater.
Step 1: First off, remove the access panel by unscrewing the two nuts. You can find the tilt switch right behind the two screws that hold the access panel. In other words, you can see a black plastic assembly with the two connectors.
Step 2: Pull those connectors loose. Then, take the tilt switch out. Regarding this, go from the above holes and use a screwdriver to unfasten the screws that hold the switch in place.
Step 3: Once you remove the tilt switch, replace it with a new one. Ensure you install it by having the tilt switch facing the inside of the heater.
Step 4: Then, line up the tilt switch with the two screws and use your screwdriver to secure the screws.
Step 5: Finally, reconnect the two wires with the tilt switch assembly to complete the installation.
How To Bypass Tilt Switch On Patio Heater
If the tilt switch on your patio heater gets knocked over, the patio heater won’t stay lit. In this case, you can bypass the tilt switch until the new replacement part doesn’t come. Follow the below steps to bypass the tilt switch.
- Locate the four screws and unscrew them by using a screwdriver. Then, keep the emitter grid aside.
- Next, remove the two lead wires from the black plastic assembly or the tilt switch assembly.
- And then, splice the two wires together.
- Now, turn on your patio heater, and you can find the heater will light up, and it doesn’t go out.
What does a dump switch do?
A dump switch or tilt switch is a safety mechanism on your patio heater or propane heater that shuts off the gas if the heater gets knocked over.
Why is my patio heater not working?
Your patio heater will not work if the tilt switch gets defective. Therefore, a faulty thermocouple or carbon buildup around the pilot is also responsible for the heater issue.
How do you clean the gas valve on a patio heater?
You can use stainless steel wool or a soft cloth to clean the gas valve on your patio heater.
Why does my outdoor propane heater keep shutting off?
Your outdoor propane heater will keep shutting off if the thermocouple gets too far away from the flame.
Just follow the step-by-step guide we mentioned to replace the tilt switch on your patio heater. However, you can bypass the tilt switch until the new one doesn’t come. If you are not mechanically inclined, hire a professional to do this task for you.