5+ Vaughn Water Heater Problems [Easy Solutions]

Like other appliances, it’s simple to face Vaughn water heater problems after using many years like-

  • The water heater is not heating
  • Not enough hot water
  • Water too hot or too cool
  • Shows error codes

Here in this article, we will focus on Vaughn water heater problems, their possible causes, and easy solution as well. Also, you will get the error codes’ meaning with the solution.

vaughn water heater problems

Well, it will help you not to replace your water heater and save your pocket. So, without further ado, let’s begin…

Vaughn Water Heater Problems & Solutions

This chapter will let you learn the common issues and the reasons behind those problems of the Vaughn Water Heater. Plus, we will also cover the solution to those water heater puzzles. 

1. Vaughn Water Heater is Not Heating

For the following reasons your Vaughn water heater delivers no hot water or won’t heat:

  • You may not turn the switch on. 
  • Improper wiring
  • No power or blown fuse due to circuit overload, inappropriate wiring
  • The controller is malfunctioning
  • Loose wire connection

Solution:

  • Turn the switch on
  • Check the wiring diagram
  • Use a standard circuit breaker
  • Replace the controller
  • Establish a secure wire connection

2. Not Enough Hot Water

Your water heater will not provide enough hot water because-

  • You don’t install a proper size heater.
  • The element of the heater starts malfunctioning or gets damaged.
  • The controller of your heater malfunctions. 

Solution:

  • Make sure you install the right size heater. 
  • Replacing the element will be your best trait.
  • Reset the default setting or change it.

3. Water Too Hot or Too Cool

Faulty controller setting and others are responsible for this water heater issue.

  • You set the controller to its highest or lowest setting.
  • Fail to replace the insulation around the elements.
  • Unusual control reading

Solution:

  • Set the controller according to your need.
  • Place the insulation accurately.
  • Replace the control or adjust it

4. Error Code “CH2O, F-01, or F-02”

For the following reasons, your Vaughn water heater displays the error codes.

  • There is a problem with the temperature sensor issue.
  • Maybe the controller sensor is also faulty.

Solution:

  • Replace your heater temperature probe or check the wire connection.
  • Change the controller sensor as well.

5. Error Codes “F-03, F-04, or F-05”

When the water heater shows F-03, it means there is a problem with the top element or an issue with the controller output. While the F-04 will let you learn about the problem of the bottom element. 

On other hand, if your heater shows F-05, know both the top element and the bottom element are malfunctioning. 

Solution:

To get rid of these issues, replace the top element or the bottom element. Also, ensure the wire connection is secure.

FAQ

Are Vaughn water heaters good?

Some users complain that it installed the unit back in 2010 and the band hasn’t been replaced yet. The worst case is- Vaughn official’s website never mentions it on their site though they offer 10 years of warranty. So, be careful when picking a water heater from Vaughn. 

How long do Vaughn water heaters last?

Vaughn water heaters last for 28 years. 

What is the most common problem with water heaters?

Water heaters don’t heat the water enough is a common problem of a water heater. However, you can overcome this issue by adjusting the thermostat. 

What are the signs of a water heater going bad?

The signs that let you know that your water heater is going bad are:

  • Water leaking
  • Not produce enough hot water
  • Make noise
  • Deliver cloudy or rusty water

What trips the reset button on a hot water heater?

A bad thermostat, loose wire connection, or the elements are responsible for tripping the reset button on a hot water heater.

How much does it cost to replace a 40-gallon water heater?

It costs you between $400-$900 to replace a new 40-gallon water heater if it comes with a tank. On the other hand, a tankless water heater will take around $1470-$2510.

Conclusion

From the beginning to the end, we have discussed Vaughn water heater problems and the reasons behind them. To get rid of the issues, we have also covered what initiatives you should take. 

If you fail to solve the problems after following the tips we have provided, we recommend you contact the Vaughn support team.

Or you can hire a certified technician to fix your water heater issues.

About William

William is the founder of Fireplacehubs.com. He has real life practical skills in fixing smoker & heating appliance issues. He loves to share his knowledge & helps others in fixing their appliances & saving their money. William firmly believes that anyone can repair his or her unit with the correct guidance & knowledge. See more at about us.

3 thoughts on “5+ Vaughn Water Heater Problems [Easy Solutions]”

  1. Not an everyday occurrence, but when it happens, don’t panic–call us! Signs of a broken or leaking water main result in loss of pressure and streams of water showing up on your property suddenly, either on the ground or around the foundation of the house.

    Reply
  2. If thawing frozen pipes does not happen, soon enough your pipes will burst, and you will know it. Run to shut off the main water line to the house. Knowing where to locate the main water shut off valve is very helpful. Normally, the main shut-off valve is located near the water meter, but just in case, know where the shutoff valve is located ahead of time. Then call your local plumber for water pipe repair.

    Reply
  3. Electric water heaters come with low installation costs. Even though gas-powered heaters may seem more affordable, quotes rarely include the cost of the vents or piping that must be installed to keep your unit operating properly. Electric water heaters, on the other hand, are easy to install.

    Reply

Leave a Reply to Eric Cancel reply